your basket is empty
Your order will be processed in GBP.
[switch currency to EUR]
Product Availability: 5 - 10 working days
[switch currency to EUR]
| Order | Request an official quote (RFQ) |
|---|
| Order Code, Price (EUR/GBP) | Probes per set |
|---|---|
| DT-FMR-10 | 10 pcs |
| € 1214.00 £ 1068.00 |
|
| DT-FMR-20 | 20 pcs |
| € 2171.00 £ 1910.00 |
|
| DT-FMR-50 | 50 pcs |
| € 4791.00 £ 4216.00 |
|
Product Availability: 5 - 10 working days
AFM Probe type:
DT-FMR
Manufacturer: NANOSENSORS
(https://www.nanosensors.com)
Product Description:
The DT-FMR probe is designed for force modulation microscopy. The force constant of this cantilever type spans the gap between contact and non-contact mode and is specially tailored for the force modulation mode. The FM probe serves also as a basis for magnetic coatings (MFM).Furthermore non-contact or tapping mode operation is possible with the FM sensor but with reduced operation stability.
For applications that require hard contact between tip and sample this sensor offers a real diamond tip-side coating. This coating features extremely high wear resistance due to the unsurpassed hardness of diamond. The typical macroscopic tip radius of curvature lies in the range between 100 and 200 nm. Nanoroughnesses in the 10 nm regime improve the resolution on flat surfaces.
The probe offers unique features:- real diamond coating
- high mechanical Q-factor for high sensitivity
- precise alignment of the cantilever position (within +/- 2 µm) when used with the Alignment Chip
- compatible with PointProbe® Plus XY-Alignment Series
Application Modes:
AFM Probe Specifications:
AFM Tips:
| shape | tip height | tip set back | tip radius | full cone angle | half cone angle | |
|---|---|---|---|---|---|---|
| Standard | 0 µm | 0 - 0 µm* | 0 µm ( 0 - 0 µm)* | < 200 nm guaranteed |
AFM Cantilever(s):
| cant. | shape | length | width | thickness | force const. | res. freq. | probe base |
|---|---|---|---|---|---|---|---|
| Beam | 225 µm (215 - 235 µm)* | 27.5 µm (20 - 35 µm)* | 3 µm (2 - 4 µm)* | 6.2 N/m (1.5 - 18.3 N/m)* | 105 kHz (65 - 155 kHz)* | ||
* guaranteed range
Coating:
The DT Diamond Coating is an approximately 100 nm thick coating of polycrystalline diamond on the tip-side of the cantilever leading to an unsurpassed hardness of the tip. The raman spectrum of the coating verifies the real diamond.Probes Datasheets:
Datasheet for all sensors with sets of 10 or 20 sensors.Datasheet for up to 32 sensors with full wafer.
**ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.
*** Olympus® is a trademark of Olympus Corporation.
Apex Probes Ltd., 12th Floor, Ocean House, The Ring, Bracknell, RG12 1AX, Phone: +44 (0)1344 388016