your basket is empty
Your order will be processed in GBP.
[switch currency to EUR]
Product Availability: 5 - 10 working days
[switch currency to EUR]
| Order | Request an official quote (RFQ) |
|---|
| Order Code, Price (EUR/GBP) | Probes per set |
|---|---|
| NW-DT-NCLR-10 | 10 pcs |
| € 1130.00 £ 994.00 |
|
| NW-DT-NCLR-20 | 20 pcs |
| € 2022.00 £ 1779.00 |
|
| NW-DT-NCLR-50 | 50 pcs |
| € 4460.00 £ 3925.00 |
|
Product Availability: 5 - 10 working days
AFM Probe type:
NW-DT-NCLR
Manufacturer: NanoWorld
(https://www.nanoworld.com)
Product Description:
NanoWorld Pointprobe® NCL probes are designed for non-contact or tapping mode imaging and offer an alternative to our high frequency non-contact type NCH. The NCL type is recommended if the feedback loop of the microscope does not accept high frequencies or if the detection system needs a minimum cantilever length (> 125 µm). This probe combines high operation stability with outstanding sensitivity. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced.
All probes of the Pointprobe® series are made from monolithic silicon which is highly doped to dissipate static charge. They are chemically inert and offer a high mechanical Q-factor for high sensitivity. The tip is shaped like a polygon based pyramid.
For applications that require hard contact between tip and sample this probe offers a real diamond tip-side coating. This coating features extremely high wear resistance due to the unsurpassed hardness of diamond.
The typical macroscopic tip radius of curvature lies in the range between 100 and 200 nm. Nanoroughnesses in the 10 nm regime improve the resolution on flat surfaces.
For applications allowing higher resonance frequencies or a shorter cantilever length use NanoWorld Pointprobe type DT-NCHR.
Application Modes:
AFM Probe Specifications:
AFM Tips:
| shape | tip height | tip set back | tip radius | full cone angle | half cone angle | |
|---|---|---|---|---|---|---|
| Standard | µm (10 - 15 µm)* | 10 - 15 µm* | ( | < 100 nm (< 200 nm guaranteed) |
AFM Cantilever(s):
| cant. | shape | length | width | thickness | force const. | res. freq. | probe base |
|---|---|---|---|---|---|---|---|
| Beam | 225 µm (220 - 230 µm)* | 37.5 µm (32.5 - 42.5 µm)* | 7 µm (6.5 - 7.5 µm)* | 72 N/m (48 - 105 N/m)* | 210 kHz (175 - 245 kHz)* | ||
* typical range
Coating:
Diamond Coating / Aluminum Reflex CoatingThe diamond coating consists of a 100 nm thick polycrystalline diamond layer deposited on the tip side of the cantilever resulting in an unsurpassed hardness of the tip.
The aluminum reflex coating deposited on the detector side of the cantilever enhances the reflectance of the laser beam and prevents light from interfering within the cantilever.
Probes Datasheets:
Datasheet for all sensors with sets of 10 or 20 sensors.Datasheet for up to 32 sensors with full wafer.
**ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.
*** Olympus® is a trademark of Olympus Corporation.
Apex Probes Ltd., 12th Floor, Ocean House, The Ring, Bracknell, RG12 1AX, Phone: +44 (0)1344 388016