your basket is empty
Your order will be processed in GBP.
[switch currency to EUR]
Product Availability: 5 - 10 working days
[switch currency to EUR]
| Order | Request an official quote (RFQ) |
|---|
| Order Code, Price (EUR/GBP) | Probes per set |
|---|---|
| PPP-FMR-10 | 10 pcs |
| € 328.00 £ 289.00 |
|
| PPP-FMR-20 | 20 pcs |
| € 587.00 £ 517.00 |
|
| PPP-FMR-50 | 50 pcs |
| € 1296.00 £ 1140.00 |
|
| PPP-FMR-W | 380 pcs |
| € 6802.00 £ 5986.00 |
|
Product Availability: 5 - 10 working days
AFM Probe type:
PPP-FMR
Manufacturer: NANOSENSORS
(https://www.nanosensors.com)
Product Description:
The PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape. The excellent tip radius and the minimized variation in tip shape provide more reproducible images and enhanced resolution.
The FM type is offered for force modulation microscopy. The force constant of this AFM probe spans the gap between contact and non-contact mode and is specially tailored for the force modulation mode. The PPP-FM probe serves also as a basis for magnetic coatings (MFM). Furthermore non-contact or tapping mode operation is possible with the FM tip but with reduced operation stability.
The probe offers unique features:
- excellent tip radius of curvature
- highly doped silicon to dissipate static charge
- Al coating on detector side of cantilever
- high mechanical Q-factor for high sensitivity
- precise alignment of the cantilever position (within +/- 2 µm) when used with the Alignment Chip
- compatible with PointProbe® Plus XY-Alignment Series
Application Modes:
AFM Probe Specifications:
AFM Tips:
| shape | tip height | tip set back | tip radius | full cone angle | half cone angle | |
|---|---|---|---|---|---|---|
| Standard | 0 µm (10 - 15 µm)* | 10 - 15 µm* | 0 µm ( 0 - 0 µm)* | < 7 nm (< 10 nm guaranteed) |
AFM Cantilever(s):
| cant. | shape | length | width | thickness | force const. | res. freq. | probe base |
|---|---|---|---|---|---|---|---|
| Beam | 225 µm (215 - 235 µm)* | 28 µm (20 - 35 µm)* | 3 µm (2 - 4 µm)* | 2 N/m (0.5 - 9.5 N/m)* | 75 kHz (45 - 115 kHz)* | ||
* guaranteed range
Coating:
The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 2% of the cantilever length.
**ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.
*** Olympus® is a trademark of Olympus Corporation.
Apex Probes Ltd., 12th Floor, Ocean House, The Ring, Bracknell, RG12 1AX, Phone: +44 (0)1344 388016