your basket is empty
Your order will be processed in GBP.
[switch currency to EUR]
Product Availability: 5 - 10 working days
[switch currency to EUR]
| Order | Request an official quote (RFQ) |
|---|
| Order Code, Price (EUR/GBP) | Probes per set |
|---|---|
| PPP-LFMR-10 | 10 pcs |
| € 328.00 £ 289.00 |
|
| PPP-LFMR-20 | 20 pcs |
| € 587.00 £ 517.00 |
|
| PPP-LFMR-50 | 50 pcs |
| € 1267.00 £ 1115.00 |
|
| PPP-LFMR-W | 380 pcs |
| € 6802.00 £ 5986.00 |
|
Product Availability: 5 - 10 working days
AFM Probe type:
PPP-LFMR
Manufacturer: NANOSENSORS
(https://www.nanosensors.com)
Product Description:
The PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape. The excellent tip radius and the minimized variation in tip shape provide more reproducible images and enhanced resolution.
For lateral or friction force microscopy NANOSENSORS™ offers a special type of AFM probe (LFM: lateral force microscopy). This sensor type is optimized for a high sensitivity to lateral or friction forces by an extremely soft, thin cantilever.
The probe offers unique features:
- excellent tip radius of curvature
- highly doped silicon to dissipate static charge
- Al coating on detector side of cantilever
- high mechanical Q-factor for high sensitivity
- precise alignment of the cantilever position (within +/- 2 µm) when used with the Alignment Chip
- compatible with PointProbe® Plus XY-Alignment Series
Application Modes:
AFM Probe Specifications:
AFM Tips:
| shape | tip height | tip set back | tip radius | full cone angle | half cone angle | |
|---|---|---|---|---|---|---|
| Standard | 0 µm (10 - 15 µm)* | 10 - 15 µm* | 0 µm ( 0 - 0 µm)* | < 7 nm (< 10 nm guaranteed) |
AFM Cantilever(s):
| cant. | shape | length | width | thickness | force const. | res. freq. | probe base |
|---|---|---|---|---|---|---|---|
| Beam | 225 µm (215 - 235 µm)* | 48 µm (40 - 55 µm)* | 1 µm (0.1 - 2 µm)* | 0.2 N/m (0.01 - 1.87 N/m)* | 23 kHz (1 - 57 kHz)* | ||
* guaranteed range
Coating:
The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 2% of the cantilever length.
**ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.
*** Olympus® is a trademark of Olympus Corporation.
Apex Probes Ltd., 12th Floor, Ocean House, The Ring, Bracknell, RG12 1AX, Phone: +44 (0)1344 388016