your basket is empty
Your order will be processed in GBP.
[switch currency to EUR]
Product Availability: 5 - 10 working days
[switch currency to EUR]
| Order | Request an official quote (RFQ) |
|---|
| Order Code, Price (EUR/GBP) | Probes per set |
|---|---|
| PPP-MFMR-10 | 10 pcs |
| € 708.00 £ 623.00 |
|
| PPP-MFMR-20 | 20 pcs |
| € 1267.00 £ 1115.00 |
|
| PPP-MFMR-50 | 50 pcs |
| € 2794.00 £ 2459.00 |
|
| PPP-MFMR-W | 380 pcs |
| € 14285.00 £ 12571.00 |
|
Product Availability: 5 - 10 working days
AFM Probe type:
PPP-MFMR
Manufacturer: NANOSENSORS
(https://www.nanosensors.com)
Product Description:
The NANOSENSORS™ PPP-MFMR AFM probe is our standard probe for magnetic force microscopy providing a reasonable sensitivity, resolution and coercitivity. It has proven stable imaging of a variety of recording media and other samples. The force constant of this probe type is specially tailored for magnetic force microscopy yielding high force sensitivity while simultaneously enabling tapping mode and lift mode operation.The SPM probe offers unique features:
- hard magnetic coating on the tip side (coercivity of app. 300 Oe, remanence magnetization of app. 300 emu/cm3)
- effective magnetic moment in the order of 10^-13 emu
- metallic electrical conductivity
- excellent tip radius of curvature
- magnetic resolution better than 50 nm
- Al coating on detector side of cantilever enhancing the reflectivity of the laser beam by a factor of about 2.5
- precise alignment of the cantilever position (within +/- 2 µm) when used with the Alignment Chip
- compatible with PointProbe® Plus XY-Alignment Series
As both coatings are almost stress free the bending of the cantilever due to stress is less than 3.5% of the cantilever length. For enhanced signal strength the magnetization of the tip by means of a strong permanent magnet prior to the measurement is recommended.
Application Modes:
AFM Probe Specifications:
AFM Tips:
| shape | tip height | tip set back | tip radius | full cone angle | half cone angle | |
|---|---|---|---|---|---|---|
| Standard | 0 µm (10 - 15 µm)* | 10 - 15 µm* | 0 µm ( 0 - 0 µm)* |
AFM Cantilever(s):
| cant. | shape | length | width | thickness | force const. | res. freq. | probe base |
|---|---|---|---|---|---|---|---|
| Beam | 225 µm (215 - 235 µm)* | 28 µm (20 - 35 µm)* | 3 µm (2 - 4 µm)* | 2.8 N/m (0.5 - 9.5 N/m)* | 75 kHz (45 - 115 kHz)* | ||
* guaranteed range
Coating:
The hardmagnetic coating on the tip is optimized for high magnetic contrast and high lateral resolution of considerably better than 50 nm. The coating is characterized by a coercivity of app. 300 Oe and a remanence magnetization of app. 300 emu/cm3 (these values were determined on a flat surface).
**ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.
*** Olympus® is a trademark of Olympus Corporation.
Apex Probes Ltd., 12th Floor, Ocean House, The Ring, Bracknell, RG12 1AX, Phone: +44 (0)1344 388016