your basket is empty
Your order will be processed in GBP.
[switch currency to EUR]
Product Availability: 5 - 10 working days
[switch currency to EUR]
| Order | Request an official quote (RFQ) |
|---|
| Order Code, Price (EUR/GBP) | Items per set |
|---|---|
|
TGF11
Mounted on 12mm round metal plate |
1 pcs |
| € 260.00 £ 229.00 |
|
|
TGF11/NM
Unmounted (chip only, no plate) |
1 pcs |
| € 260.00 £ 229.00 |
|
Product Availability: 5 - 10 working days
AFM Probe type:
TGF11
Manufacturer: MikroMasch
(https://www.spmtips.com)
Product Description:
The TGF calibration gratings feature one-dimensional arrays of trapezoidal steps etched into a silicon substrate. The sidewalls of the structures are very smooth and planar surfaces with well-defined orientation formed by the (111) crystallographic planes in monocrystalline silicon. The sidewalls and the horizontal top surfaces form a well defined angle.
- array pitch 10 µm, accuracy 0.1 µm
- edge angle 54.74°
- 3 x 3 mm
- step height ~ 1 µm (approximate value, not for vertical calibration purposes)
- chip dimensions 5 x 5 x 0.3 mm
Application
TGF11 grating can be used for the assessment of scanner nonlinearity in the vertical direction. Direct calibration of the lateral force can be obtained by analyzing the contact response measured on the flat and sloped facets. This can be done for the calibration of conventional Si probes or cantilevers with an attached colloidal particle with any radius of curvature up to 2 μm.
**ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.
*** Olympus® is a trademark of Olympus Corporation.
Apex Probes Ltd., 12th Floor, Ocean House, The Ring, Bracknell, RG12 1AX, Phone: +44 (0)1344 388016